Welcome, Guest

TOPIC: Shunt calculations

Shunt calculations 4 years 11 months ago #1140

  • cgo
  • cgo's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 6
  • Karma: 0
Hi,
I use a winch system made of 3 smartmotors (SM23165DT with brake option and i=20 gearbox) for moving a payload into X/Y/Z dimensions. It looks like a reversed tetrahedron, with the payload being at the intersection of the three winches strings. This is a "vertical application", so to speak the same language as the manual.

My concern is about motors generating voltage, and their protection. Our power supplies are at 48V, close to the maximum allowed.

How do I do the math for dimensioning the shunts ?

Is there a way to calculate voltage/current generation based on speed/load of the shaft ? Or some chart maybe.

The motors are 200W each. We are using about 50W-100W on each on average.

Thank you,

--
Charles
The administrator has disabled public write access.

Re: Shunt calculations 4 years 11 months ago #1141

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Moderator
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
It's hard to calculate as it's load and speed dependent. Based on your motor wattage I would use at least 2 200watt shunts.
The administrator has disabled public write access.

Re: Shunt calculations 4 years 11 months ago #1142

  • cgo
  • cgo's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 6
  • Karma: 0
Hi, thank you for your answer.

My load (about 5 kg) is known.

Maybe I can make a chart out of the load and speed. Is the Voltage constant a useful figure to calculate that ? I have some mechanical engineers at hand that can do the math if I get the input data right.
The administrator has disabled public write access.

Re: Shunt calculations 4 years 11 months ago #1143

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Moderator
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
The voltage constant would be the value to use for calculations.
The administrator has disabled public write access.
Moderators: hsummer, csearcy, swalters, mmeyers
Time to create page: 0.233 seconds
Powered by Kunena Forum