Welcome, Guest
Username Password: Remember me
Messages posted to this category need to be reviewed by the moderator before it gets posted.
  • Page:
  • 1

TOPIC: CANOpen documentation is missing

CANOpen documentation is missing 3 years, 12 months ago #721

I am trying to move the Smartmotor using the CANOpen Interpolation Mode.
The User Guide provides almost zero information about the CANOpen protocol and the EDS file contains a Manufacturer specific segment.
Can I get the documentation for that Manufacturer Segment? Some part are self explaining but others are ambiguous.

Re: CANOpen documentation is missing 3 years, 12 months ago #722

  • csearcy
  • OFFLINE
  • Posts: 480
  • Karma: 23
We don't have a specific manual for interpolation mode at this time. The CiA (CAN in Automation) website is the best resource. You can send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it with your contact information and we will try to assist with the manufacturer specific parameters.
Last Edit: 3 years, 12 months ago by csearcy.

Re: CANOpen documentation is missing 2 years, 9 months ago #1185

  • Dmitry
  • OFFLINE
  • Posts: 1
  • Karma: 0
Hello!
I have the same problem,there is no full information about CAN registers in eds.file.Do you have expanded information about CANOpen?
Best regards,Dmitriy.

Re: CANOpen documentation is missing 2 years, 9 months ago #1186

  • csearcy
  • OFFLINE
  • Posts: 480
  • Karma: 23
We will be releasing a new CANopen documentation package by the end of December.
  • Page:
  • 1
Moderators: hsummer, csearcy
Time to create page: 0.43 seconds