VLCT45

  • Strokes of 50-200mm in 50mm steps
  • Available with Pulley Offset



+
-

Data Table

Parameter

Value

Units

Configuration & Physical Parameters

Motor

23 frame D-series SmartMotor ONLY

-

Coupling

Beam

-

Ball Screw Leads

6, 12

mm/rev

Position Sensors

consult factory

-

Stroke Lengths

50, 100, 150 and 200

mm

Overall Length

Stroke + 251.4 + motor

mm

Overtravel

None

mm

Unit Mass

1.45 + 0.0052 x (stroke, mm)
+ (motor mass, kg)

kg

Performance

Unidirectional Repeatability

20

µm

Bidirectional Reapeatability

40

µm

Linear Accuracy

0.21/300

mm/mm

Max Velocity

470 -1000 (stroke dependent)

mm/s

Max Acceleration

0.3

G

Payload Mass

5.6

kg

Rated Velocity

400

mm/s

Lifetime*

15000

hr

Load Rating, Dynamic

Using SM23165DT motor

Direct Drive

2:1 pulley**

-

Displacement/rev 6 12 6 12 mm/rev

Max Continuous Thrust

461 231 922 461 N

Max Peak Thrust

745 372 1490 745 N

*Based on operating at an average speed of the rated velocity at the given payload. The Lifetime will be significantly reduced operating above the Rated Velocity and/or given payload.
**Please see the links below or the Pulley Offset tab for the Pulley Offset CAD drawings.

NOTE: Specifications are subject to changes without notice.

CAD Drawings

cad-vl-ct45

NOTE: Specifications are subject to changes without notice.

Max Speed Limit

WARNING: Do not exceed these limits.

limit-vl-ct

NOTE: Specifications are subject to changes without notice.

Pulley Offset

cad-VL-CT45_pulley_offset_600px

NOTE: Specifications are subject to changes without notice.

Download Related Files

Download iconAutoCAD icon
AutoCAD
SolidWorks icon
SolidWorks
IGES icon
IGES
CAD Drawing icon
CAD Drawing
Spec icon
Spec
VLCT45 VLCT45
-w/ Pulley Offset
Go to Actuator download centerClick here to go to Actuator Download Center


+
-