Parallel Axis Gantry

Parallel Axis Gantry

alt   In wide gantry applications, the base axis can be moved with two motors, one Master, one Slave. Additionally, the master axis can follow product flow under the gantry for operations such as flying shears, material cutoff, cross-cut saws, etc.
Proper fault handling will prevent racking of the gantry in the event that either the Master or Slave faults out during a move. Homing is done only once at power-up. The Master and Slave sync up maintaining perfect alignment.
See our CNC software on page 73-75 for full CNC
capabilities.


 

Contact Tech Support

The SmartMotor™ Companion

download-200