VLCT55

Strokes of 50-150mm in 50mm steps
Available with Pulley Offset

Data Table

Parameter	Value			Units
Configuration & Physical Parameters
Motor	Animatics SmartMotors SM23165D & SM23165DT			-
Coupling	Beam			-
Ball Screw Leads	12			mm/rev
Position Sensors	consult factory			-
Stroke Lengths	50 - 300mm in 50mm steps			mm
Overall Length	Stroke + 274.9			mm
Over-Travel	0			mm
Unit Mass	1.94 + (stroke, mm)*0.0075			kg
Performance
Unidirectional Repeatability	20			µm
Bi-directional Reapeatability	40			µm
Accuracy	0.021/300			mm/mm
Max Velocity	470 -1000 (stroke dependant)			mm/s
Max Acceleration	0.3			G
Payload Mass	22			kg
Rated Velocity	400			mm/s
Lifetime*	15000			hr
Load Capacities, Dynamic
Using SM2316DT-PLS2 motor	Direct Drive	2:1 pulley**	3:1 pulley**	-
Max Continuous Thrust	262	490	737	N
Max Peak Thrust	394	788	1182	N

* Based on operating at an average speed of the rated velocity at the given payload. The Lifetime will be significantly reduced operating above the Rated Velocity and/or given payload.

**Please see below for links to Pulley Offset CAD drawings.

CAD Drawings

cad-vl-ct55

Thrust Curves

VLCT55 with SM23165DT

@48V, Direct Drive & 1:1 Pulley Offset	@42V, Direct Drive & 1:1 Pulley Offset	@24V, Direct Drive & 1:1 Pulley Offset
@48V, Direct Drive & 2:1 Pulley Offset	@42V, Direct Drive & 2:1 Pulley Offset	@24V, Direct Drive & 2:1 Pulley Offset
@48V, Direct Drive & 3:1 Pulley Offset	@42V, Direct Drive & 3:1 Pulley Offset	@24V, Direct Drive & 3:1 Pulley Offset

Max Speed Limit

limit-vl-ct

Pulley Offset

cad-VL-CT55_pulley_offset_600px

Download Related Files

	AutoCAD	SolidWorks	IGES	CAD Drawing	Spec
VLCT55	VLCT55 -w/ Pulley Offset	VLCT55 -w/ Pulley Offset	VLCT55 -w/ Pulley Offset	VLCT55 -w/ Pulley Offset	VLCT55 -w/ Pulley Offset
Click here to go to Actuator Download Center