2-Axis TTR (XZ Configuration)
2-Axis TTR (XZ Configuration)
Animatics Table Top Robots consist of an X Z ball screw driven Cartesian system.Overview
| Number of axes: | 2 axes |
| High Repeatability: | 16 Microns |
| Work Envelope: | Up to 600mm by 250mm |
| High Precision: | 8000 positioning points |
| Load Capability: | Up to 45Kg load at 250mm/sec |
Features:
- Highly Configurable
- Work area up to 600mmx250mm
- 120-240VAC 50./60hz Input
- E-Stop Drive Power
- Maintained control power
- 2.5mm/rev X axis, 5mm/rev Z axis, 1600 counts/mm resolution for X axis and 800 counts/mm resolution for Z axis
- 275mm/sec X and 550mm/sec Z
- Optional up to 40 channels of Universal 24V I/O
- Optional Combitronic with CANopen or DeviceNet protocol
P/N Scheme
A quick guide to Part Number:
ex: TTR1-200-N-150 is a typical P/N for TTR where- TTR1 is the series
- 200 is the X-Axis length in mm
- N is the Y-Axis length in mm N implies None, meaning this is 2-Axis TTR
- 150 is the Z-Axis length in mm
Part Numbers
| Part Number | Axis stroke length (mm) | Max Speed (mm/s)* | Load Capability (kg) | Repeatability (mm) | ||
| X | Y | Z | ||||
| TTR1-200-N-50 | 200 | - | 50 | 400 | 25 | 0.016 |
| TTR1-200-N-150 | 200 | - | 150 | 400 | 25 | 0.016 |
| TTR1-200-N-250 | 200 | - | 250 | 400 | 25 | 0.016 |
| TTR1-400-N-50 | 400 | - | 50 | 400 | 25 | 0.016 |
| TTR1-400-N-150 | 400 | - | 150 | 400 | 25 | 0.016 |
| TTR1-400-N-250 | 400 | - | 250 | 400 | 25 | 0.016 |
| TTR1-600-N-50 | 600 | - | 50 | 400 | 25 | 0.016 |
| TTR1-600-N-150 | 600 | - | 150 | 400 | 25 | 0.016 |
| TTR1-600-N-250** | 600 | - | 250 | 400 | 25 | 0.016 |
* Maximum speed measured at no load.
** Standard Configuration
Product Category
Watch the SmartMotor™ in action
CNC Surfboard Machine using SmartMotor and HLD60 Belt Drive Actuator
Click to go to the Application page
Click to go to the Application page
Have Questions?
