Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Class 4 Current When Servo OFF

Class 4 Current When Servo OFF 5 years 7 months ago #733

Hi,
I would like to ask the current of Class 4 motor when Servo off. My Class 4 Motor current when servo off is 12mA. Is it normal.
The administrator has disabled public write access.

Re: Class 4 Current When Servo OFF 5 years 7 months ago #734

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
Yes. That is normal for a SmartMotor (3-phase BLDC servo motor)... much better than a stepper motor and drive!... which can usually only reduce to 50% when idle... but still draws more Amps.
The SmartMotor can turn the drive stage OFF... which results in the ~12mA current draw you are seeing.
It's also... quiet (no buzz) when moving... it can reach much higher RPM... with little loss in torque... it requires less wiring due to the integrated design... and lowers your overall cost.
Last Edit: 5 years 7 months ago by csearcy.
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: hsummer, csearcy
Time to create page: 0.253 seconds