Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Timing Pulses

Timing Pulses 2 years 11 months ago #1836

  • asterof
  • asterof's Avatar
  • OFFLINE
  • Posts: 15
  • Thank you received: 1
  • Karma: 0
So I need to at any given speed monitor a pulse on port E
I need that pulse to occur based on a variable I can set assign the time to
I do not see a function for a time acc value
So I assume that I need a loop that looks at the input and resets something
when it sees the pulse but if it does not then does a gosub
FW 4, can you point me to a sample or instruction to do that
Thanks
The administrator has disabled public write access.

Re: Timing Pulses 2 years 11 months ago #2041

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
In Class5 you can use an interrupt. In Class4 you have to trap the value of CLK to a variable.
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: hsummer, csearcy
Time to create page: 0.276 seconds