Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Limits on small motor moves?

Limits on small motor moves? 5 years 9 months ago #676

I'm using SM1720D85C-DE in a current design. Due to the hardware design and customer's specs I need to be able to make numerous 'small' (~15-40 motor counts) moves in the same direction. I've adjusted the position error down to 15 (E=15 F) and tried PID settings both 'tight' and 'loose' (defined/calculated by SSI application). I'm seeing what I believe is odd behaviour. For the most part everything works as expected BUT at seemingly random intervals the motor will 'jump' forward/backward by ~350ish motor counts. Any thoughts?
Thanks in advance.

JT
The administrator has disabled public write access.

Re: Limits on small motor moves? 5 years 9 months ago #680

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
Hi JT,
Please send your program to This e-mail address is being protected from spambots. You need JavaScript enabled to view it and we will try to determine the cause.
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: hsummer, csearcy
Time to create page: 0.280 seconds