Welcome, Guest
Username: Password: Remember me
Messages posted to this category need to be reviewed by the moderator before it gets posted.
  • Page:
  • 1

TOPIC: Distance between SmartMotor and Controller

Distance between SmartMotor and Controller 8 years 6 months ago #10

  • Animatics
  • Animatics's Avatar
  • Posts: 44
  • Thank you received: 1
  • Karma: 0
What are the maximum recommended distance between SmartMotor and the computer/controller for communication through RS232, RS485, AniLink, and I/O connector?

This question is difficult to answer because so many factors are involved. In most instances, we quote 30 feet (10 meters) for RS232, 1000 feet for RS485, 10 feet (3 metres) for AniLink, and 3 feet for I/O connector. (The 10PWR105 used for powering AniLink devices allows the addition of multiple motors to the network but does not increase separation.)
Last Edit: 8 years 6 months ago by Animatics.
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: hsummer, csearcy
Time to create page: 0.271 seconds