Welcome, Guest
Username: Password: Remember me
Messages posted to this category need to be reviewed by the moderator before it gets posted.
  • Page:
  • 1

TOPIC: Print function not printing it all, and the text is not aligned?

Print function not printing it all, and the text is not aligned? 6 years 5 months ago #358

Hello Again,
I am trying to read the velocity from a SM3440D while it is moving. I cannot get logical output. Can you please advice? I am using 415C
Last Edit: 6 years 5 months ago by csearcy.
The administrator has disabled public write access.

Re: Print function not printing it all, and the text is not aligned? 6 years 5 months ago #359

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
Please try the following code..

ZS
A=10
V=10000
MP
WHILE 1
P=4000
G
TWAIT
P=0
G
TWAIT
LOOP
END

This program will go 1 rev and back forever. Go to the tools menu and open Chart View.
You can chart velocity and other parameters like position and position error.
If you right click on the chart, you can copy the data and paste it into Excel.
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: hsummer, csearcy
Time to create page: 0.292 seconds