D15IOAD1

The D15IOAD1 is a means of externally setting the address of a SmartMotor™ and providing 24V isolated Input/Output. It provides two power outputs to direct drive solenoids and relays and four inputs that interface with the SmartMotor's ports A through D. The SmartMotor address is selected via the two D15IOAD1 two rotary switches and incorporating a routine into the SmartMotor user program. The exact text of the routine is listed in the User's Guide. Both the SmartMotor read-address function and 24V output control are handled over the AniLink port, so ports E and F are not available to the user when using the D15IOAD1. Both the inputs and outputs are bipolar, where the common line can be connected to either 24V or 24V return. This allows the user to determine whether the inputs and outputs are sourcing or sinking. There is one common line for inputs and another for the outputs. The D15IOAD1 comes with a 1ft (0.3m) flying lead cable. This cable is also available in 10ft (3m) length by adding the suffix - 3m.

Features
* Terminal block cable interface.
* Optically isolated I/O.
* Multiple functions.
* Totem-pole diode protected outputs.

Benefits
* Easy cable construction.
* Avoids ground loops.
* Four flavors to choose from!
* Direct low-power solenoid or relay drive.

Electrical:
24V Inputs: 12 to 28V @ 2.5 to 7.8 mA
24V Outputs: 0 – 28VDC, 75mA maximum
5V TTL Inputs: 4 to 7 V @ 4.5 to 14 mA

Mechanical:
Dimensions: see figure