Welcome, Guest

TOPIC: SMI Change Ehternet Port from 10001 to 4000

SMI Change Ehternet Port from 10001 to 4000 6 years 10 months ago #372

  • gwood24
  • gwood24's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 15
  • Thank you received: 2
  • Karma: 1
Is it possible to change the ethernet port in SMI from the default 10001 to a different user defined port like say 4000?
The administrator has disabled public write access.

Re: SMI Change Ehternet Port from 10001 to 4000 6 years 10 months ago #373

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Moderator
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
Port 10001 is the only one available. It's hard coded into the Ethernet board on that product.
The administrator has disabled public write access.

Re: SMI Change Ehternet Port from 10001 to 4000 6 years 10 months ago #374

  • gwood24
  • gwood24's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 15
  • Thank you received: 2
  • Karma: 1
Thank you for your help, much appreciated. FYI, I'm working with a Red Lion HMI, and their Crimson 3 software will only allow ports up to 9999.
The administrator has disabled public write access.

Re: SMI Change Ehternet Port from 10001 to 4000 6 years 10 months ago #375

  • csearcy
  • csearcy's Avatar
  • OFFLINE
  • Moderator
  • Posts: 459
  • Thank you received: 77
  • Karma: 23
Yes... Sorry to say... we can't make any changes on our current Class4 -ETH product... though that will be changing in the near future... but... Red Lion may be able to offer a work around... they're good at that!
The administrator has disabled public write access.
The following user(s) said Thank You: gwood24

Re: SMI Change Ehternet Port from 10001 to 4000 6 years 10 months ago #376

  • gwood24
  • gwood24's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 15
  • Thank you received: 2
  • Karma: 1
Yeah, I would assume that it is easier for them to change their software than it is for you to change a board on a class 5 motor ;-)
The administrator has disabled public write access.
Time to create page: 0.265 seconds
Powered by Kunena Forum