HP NEMA 34 Series
HP NEMA 34 Series
Description
Product Table
Part # | Ratio | Continuous Output Torque | Gearhead Inertia at input (lb-in-sec2) | ||
---|---|---|---|---|---|
@ 1500 rpm input (in-lbs) | @ 3500 rpm input (in-lbs) | @ 5000 rpm input (in-lbs) | |||
Single Stage | |||||
GH34P3 | 3:1 | 1010 | 615 | 475 | 6.77x10-4 |
GH34P4 | 4:1 | 982 | 643 | 513 | 2.77x10-4 |
GH34P5.5 | 5.5:1 | 913 | 657 | 543 | 1.51x10-4 |
GH34P7 | 7:1 | 859 | 653 | 554 | 1.11x10-4 |
GH34P10 | 10:1 | 707 | 575 | 505 | 7.90x10-5 |
Double Stage | |||||
GH34P16 | 16:1 | 1350 | 1145 | 1027 | 2.86x10-4 |
GH34P22 | 22:1 | 1401 | 1234 | 1133 | 1.55x10-4 |
GH34P28 | 28:1 | 1432 | 1293 | 1203 | 1.11x10-4 |
GH34P40 | 40:1 | 1469 | 1362 | 1293 | 8.04x10-5 |
GH34P49 | 49:1 | 1067 | 1010 | 971 | 1.11x10-4 |
GH34P55 | 55:1 | 1228 | 1165 | 1123 | 7.94x10-5 |
GH34P70 | 70:1 | 1081 | 1040 | 1010 | 7.90x10-5 |
GH34P100 | 100:1 | 827 | 805 | 790 | 7.87x10-5 |
NOTE: Please see the Axial Load tab for load specifications. PEAK TORQUE: 15% above continuous rating.
WARNING: Repeated peak torque loading may cause failure and will void the warranty.
NOTE: When using with SM34165DT and SM34165MT series motors: All gearheads above come standard with 3/8 inch diameter input shaft. For gearheads requiring a 0.5 inch shaft input, please add "-0.5" to the part number. Example: GH34P3-0.5 will provide a 0.5 inch input shaft diameter.
NOTE: Specifications are subject to changes without notice.
Download the Gearheads specifications